Pay attention to the details of the installation of the casement door
The following eight points should be paid attention to when installing casement door:
1. Pay attention to the assembly quality when installing the side-hung door, and the joints should be smooth, and the frame fan should not split or change corners.
2. The surface layer is contaminated and color, and the finished product protection is not paid attention to during the construction, and the cleaning is not carried out in time.
3. Scratches on the surface should be strictly avoided to clean up the dirt on the flat surface with a hard object.
4. The glass cutting size is not well grasped, the size is not measured according to the actual object, the cutting does not meet the installation requirements, and it is too large or too small.
5. The mortar and sundries in the notch are not cleaned up, and the cleaning should be carefully controlled, and glass is not allowed to be installed without inspection.
6. If the nylon top or rubber strip is missing or the length is not in place, the sealing material should be selected according to the design requirements, and reinstall it in time if it is lost.
7. The improper selection of the rubber bead will result in a poor sealing effect. The sealing rubber strip is easy to come off at the corners. Brush glue under the sealing strip to make it firmly combined with the glass and frame fan.
8. The glass is not clean or cracked. After the glass is installed, clean it with a soft cloth or cotton thread in time to make it transparent and bright. If the glass is found to be cracked, replace it in time.
1. Pay attention to the assembly quality when installing the side-hung door, and the joints should be smooth, and the frame fan should not split or change corners.
2. The surface layer is contaminated and color, and the finished product protection is not paid attention to during the construction, and the cleaning is not carried out in time.
3. Scratches on the surface should be strictly avoided to clean up the dirt on the flat surface with a hard object.
4. The glass cutting size is not well grasped, the size is not measured according to the actual object, the cutting does not meet the installation requirements, and it is too large or too small.
5. The mortar and sundries in the notch are not cleaned up, and the cleaning should be carefully controlled, and glass is not allowed to be installed without inspection.
6. If the nylon top or rubber strip is missing or the length is not in place, the sealing material should be selected according to the design requirements, and reinstall it in time if it is lost.
7. The improper selection of the rubber bead will result in a poor sealing effect. The sealing rubber strip is easy to come off at the corners. Brush glue under the sealing strip to make it firmly combined with the glass and frame fan.
8. The glass is not clean or cracked. After the glass is installed, clean it with a soft cloth or cotton thread in time to make it transparent and bright. If the glass is found to be cracked, replace it in time.
